No results found.
Search results
Papers
Title | PDF or link | Author(s) |
---|---|---|
21st Century Skills for the Aerospace Industry Workforce and Their Translation to the ClassroomPARTNER: CEAS |
Lappas, Ilias (South Wales University), Kourousis, K.I.K. (University of Limerick) | |
A Comparison Between Experimental and Numerical Analysis of a Wells TurbinePARTNER: EUROTURBO |
Cambuli, F. Ghisu, T. Puddu, P. | |
A Comparison of Nonlinear Actuator Disk Methods for the Performance Analysis of Ducted PropellersPARTNER: EUROTURBO |
Bontempo, R. Cardone, M. Manna, M. Vorraro, G. | |
A Computational Investigation of the Effect of Surface Roughness on Heat Transfer on the Stator Endwall of an Axial TurbinePARTNER: EUROTURBO |
Abhari, R. S. Cottier, F. Crawford, M. E. Laveau, B. Lutum, E. | |
A Detailed View on the Mixing and Loss Generation Process During Steam Admission Concerning Geometry, Temperature and PressurePARTNER: EUROTURBO |
Engelmann, D. Mailach, R. | |
A distributed simulation framework for rapid deployment of research demonstratorsPARTNER: CEAS |
Entz, Ricardo (Airbus Defence and Space), Tressoldi Moreira, Fernandes de Oliveira, Schubert, Dickmanns, Stenzel, Scherer, Schwening (Airbus Defence and Space GmbH) | |
A Flight State Estimator That Couples Stereo-Vision, INS, and GNSS Pseudo-Ranges to Navigate with Three or Less SatellitesPARTNER: CEAS |
Andert, Franz; Dittrich, Jörg; Batzdorfer, Simon; Becker, Martin; Bestmann, Ulf; Hecker, Peter | |
A Frequency-Limited H2 Model Approximation Method with Application to a Medium-Scale Flexible AircraftPARTNER: CEAS |
Vuillemin, Pierre; Poussot-Vassal, Charles; Alazard, Daniel | |
A Full-Authority Automatic Flight Control System for the Civil Airborne Utility Platform S15 – LAPAZPARTNER: CEAS |
Dalldorff, Lothar; Luckner, Robert; Reichel, Reingard | |
A Harmonic Balance Method in Graphics Processing Units for Vibrating BladesPARTNER: EUROTURBO |
Corral, R. Crespo, J. | |
A High Efficiency Microturbine ConceptPARTNER: EUROTURBO |
Backman, J. Honkatukia Juha, J. Jaatinen-Värri, A. Larjola, J. Malkamäki, M. | |
A High-Precision Position Turn-Table as the Reference for Angular Accelerometer Calibration ExperimentPARTNER: CEAS |
Jatiningrum, Dyah (Delft University of Technology), Lu, P., De Visser, C.C., van Paassen, M.M., Mulder, M. (Delft University of Technology) | |
A Hybrid Parallelization Strategy of a CFD Code for Turbomachinery ApplicationsPARTNER: EUROTURBO |
Arnone, A. Dominguez, A. Giovannini, M. Marconcini, M. | |
A Low-Cost Integrated System for Indoor and Outdoor Navigation of Miniature UAVsPARTNER: CEAS |
Marmet, François-Xavier; Bertrand, Sylvain; Hérissé, Bruno; Carton, Mathieu | |
A methodological approach for the Product Development Process optimization of aircraft componentsPARTNER: CEAS |
Mulder, Bram (Delft University of Technology), La Rocca, G. (Delft University of Technology), De Jong, H., Van der Elst, S. (KE-works) | |
A Multidisciplinary and Practical view in Aeronautical Engineering EducationPARTNER: CEAS |
De Paula, Adson (Technological Institute of Aeronautics ITA), Germano, J.S.E., Morales, M.A., Carvalho, F.C., Passador, F.E (Technological Institute of Aeronautics ITA) | |
A Multiple-Observer Scheme for Fault Detection, Isolation and Recovery of Satellite ThrustersPARTNER: CEAS |
Abauzit, Antoine; Marzat, Julien | |
A New Approach for the Validation of Potential Pilot Gain MeasuresPARTNER: CEAS |
Niewind, Ina | |
A new computational framework for UAV quadrotor noise predictionPARTNER: CEAS |
Vieira, Ana (CEIIA) | |
A New Joint Sensor Based Backstepping Control Approach for Fault-Tolerant Flight ControlPARTNER: CEAS |
Sun, Liguo; Chu, Qiping; de Visser, Cornelis. C. | |
A New Substitution Based Recursive B-Splines Method for Aerodynamic Model IdentificationPARTNER: CEAS |
Sun, Liguo; Chu, Qiping; de Visser, Cornelis. C. | |
A potential framework for the safe and permanent passivation of a LEO battery bus power systemPARTNER: CEAS |
Alcindor (SSTL) | |
A semi-empirical methodology for balanced field length estimation of jet-engined aircraft in early design phasesPARTNER: CEAS |
Angeiras, Tulio (Embraer), Orra, T.H. (Embraer), Paula, A.A., Mattos, B.S. (Instituto Tecnológico de Aeronáutica - ITA) | |
A Spherical Coordinate Parametrization for an In-Orbit Bearings-Only Navigation FilterPARTNER: CEAS |
Grzymisch, Jonathan; Fichter, Walter; Casasco, Massimo; Damiana, Losa | |
Accelerating MRO procedures for composite materials using innovative detection techniquesPARTNER: CEAS |
Schoemaker, Christiaan (Hogeschool van Amsterdam), Pelt, M.M.J.M., Boer, R.J., Borst, M.S. (Hogeschool van Amsterdam), Groves, R.M. (Delft University of Technology) | |
Acoustic Analysis of a Steam Turbine Double Seat Control ValvePARTNER: EUROTURBO |
Bianchini, C. Cosi, L. Da Soghe, R. Imparato, E. | |
Active and Passive Disturbance Isolation for High Accuracy Control SystemsPARTNER: CEAS |
Boquet, Fabrice; Falcoz, Alexandre; Bennani, Samir | |
Active Flow Control Applied at the Engine-Wing JunctionPARTNER: CEAS |
Fricke, Sebastian (previously German Aerospace Center DLR), Vlad Ciobaca, Anna Kröhnert, Jochen Wild (DLR), Olivier Blesbois (Airbus Operations) | |
Adaptive Augmentation of a Fighter Aircraft Autopilot Using a Nonlinear Reference ModelPARTNER: CEAS |
Leitão, Miguel; Peter, Florian; Holzapfel, Florian | |
Adaptive Control of Flutter Suppression of Wind Turbine Blade Using MicrotabsPARTNER: CEAS |
Li, Nailu; Balas, Mark; Nikoueeyan, Pourya | |
Adaptive Disturbance Tracking Control to Maximize the Power Capture of Large Wind Turbines in below Rated Wind Speed RegionPARTNER: CEAS |
Thapa Magar, Kaman; Balas, Mark; Frost, Susan | |
Adaptive Trajectory Controller for Generic Fixed-Wing Unmanned AircraftPARTNER: CEAS |
Mühlegg, Maximilian; Dauer, Johann; Dittrich, Jörg; Holzapfel, Florian | |
Additive layer manufacturing of monolithic catalyst bedPARTNER: CEAS |
Essa (University of Birmingham) | |
Additive Manufacturing for Space applications on European Space ProgramsPARTNER: CEAS |
Bonvoisin, B. (European Space Agency), Gumpinger, J., Ghidini, T., Pambaguian, L., Pigliaru, L., Makaya, A., Gerard, R. (ESA) | |
Additive manufacturing of space propulsion hardwarePARTNER: CEAS |
Smith (European Space Agency) | |
Additive Manufacturing: the Right Answer for a Cleaner and More Efficient Access to SpacePARTNER: CEAS |
Varetti, Mauro (Avio Aero) | |
Advanced composite for space applications: Design and Structural Analysis of CFRP Electronics HousingPARTNER: CEAS |
Voicu, Raluca (Romanian Research and Development Institute for Gas Turbines COMOTI) | |
Advanced Core Engine TechnologiesPARTNER: EUROTURBO |
Von Der Bank, R. | |
Advanced Endwall Contouring for Loss Reduction and Outflow Homogenization for an Optimized Compressor CascadePARTNER: EUROTURBO |
Hergt, A. Nicke, E. Reutter, O. Rozanski, M. | |
Advanced Study of Secondary Flow Structures in a Highly Loaded Compressor CascadePARTNER: EUROTURBO |
Franke, M. Grund, S. Hergt, A. Klinner, J. Morsbach, C. | |
Aerial Delivery dynamic model validation by Flight TestPARTNER: CEAS |
Oliver, Mercedes (Airbus Defence and Space), Pérez, A.P., Rodríguez, A.J. (ALTRAN), Climent, H.C. (Airbus Defence and Space) | |
Aero-thermal Investigation of End Wall and Showerhead Cooling in a Nozzle Vane CascadePARTNER: EUROTURBO |
Barigozzi, G. Epis, P. Perdichizzi, A. Ravelli, S. | |
Aeroacustical and Flow Analysis in an Automotive Turbocharger Centrifugal Compressor by CFD Calculations and MeasurementsPARTNER: EUROTURBO |
Broatch, A. Desantes, J.M. Galindo, J. Navarro, R. | |
Aerodynamic Design and Shape Optimization of Transonic Joined-Wing Civil TransportPARTNER: CEAS |
Zhang, Mengmeng (Royal Institute of Technology), Rizzi, R. A. (Royal Institute of Technology), Nangia, R. K. N. (University of Bristol) | |
Aerodynamic Investigation of External Cooling and Applicability of SuperpositionPARTNER: EUROTURBO |
Fridh, J. Saha, R. | |
Aerodynamic Investigation of Tip Section for Titanium Blade 54''PARTNER: EUROTURBO |
Fort, J. Fürst, J. Luxa, M. Rudas, B. afarík, P. imurda, D. Synác, J. | |
Aerodynamic modelling of an active flow control system for flapless flight control in the preliminary design stagesPARTNER: CEAS |
Stadlberger, Korbinian (Technische Universität München), Hornung, M. (Technische Universität München) | |
Aerodynamic Performance of a Very-High-Lift Low-Pressure Turbine Airfoil (T106C) at Low Reynolds and High Mach Number Including the Effect of Incoming Periodic WakesPARTNER: EUROTURBO |
Arts, T. Clinckemaillie, J. Fattorini, L. Fontani, T. Nuyts, C. Wain, G. | |
Aerodynamic Performanceo Of an Ultra-Low Aspect Ratio Centripetal Turbine StatorPARTNER: EUROTURBO |
Arts, T. Fontaneto , F. Picot, P. Simon, M. | |
Aerodynamic Validation of a Parametric Airfoil DescriptionPARTNER: CEAS |
Melin, Tomas (Linköpings Universitet), Gårdhagen, R. (Linköpings Universitet) | |
Aeroelastic Concepts in Civil Aircraft Wings DesignPARTNER: CEAS |
Mazidi, Abbas (Yazd university), Fazelzadeh, S.A., Ranjbar, A. (Shiraz university) | |
Aeroservoelastic Investigations of a High-Aspect-Ratio Motor GliderPARTNER: CEAS |
Silvestre, Flavio Jose | |
Air Data Sensor Fault Detection Using Kinematic RelationsPARTNER: CEAS |
Van Eykeren, Laurens; Chu, Qiping | |
Air Traffic Flow Optimisation With Trajectory UncertaintyPARTNER: CEAS |
Bil, Cees (RMIT University), Assaad, Z., Eberhard, A., Moore, M. (RMIT University) | |
Airbus Defence and Space Global Approach to Space Debris MitigationPARTNER: CEAS |
Duhamel, Thierry (Airbus Defence and Space), Daniel Briot (Airbus Defence and Space) | |
Aircraft Longitudinal Guidance Based on a Spatial ReferencePARTNER: CEAS |
Bouadi, Hakim; Choukroun, Daniel; Mora-Camino, F. | |
Aircraft Preliminary Design: the Windowless ConceptPARTNER: CEAS |
Bagassi, Sara (University of Bologna), Lucchi, F., Persiani, F. (University of Bologna) | |
All moving tail plate interaction on an aerodynamic characteristic of the rocket plane in tailless configurationPARTNER: CEAS |
Kwiek, Agnieszka (Warsaw University of Technology), Figat, M.F., Senenko, K.S. (Warsaw University of Technology) | |
An Algebraic Intermittency Model Added to the k-? RANS Model for Transition SimulationPARTNER: EUROTURBO |
Dick, E. Górecki, B. Kubacki, S. | |
An automated CFD analysis workflow in overall aircraft design applicationsPARTNER: CEAS |
GU, Xiangyu (German Aerospace Center DLR), Ciampa, P.D., Nagel, B. (German Aerospace Center DLR) | |
An ecological flow-based decision support tool for future 4D-trajectory management by air traffic controlPARTNER: CEAS |
Klomp, Rolf (Delft University of Technology) | |
An Impulsive Input Approach to Short Time Convergent Control for Linear SystemsPARTNER: CEAS |
Weiss, Martin; Shtessel, Yuri B. | |
An Object Oriented Sequential Network Modeling ApproachPARTNER: EUROTURBO |
Córdoba Muñoz, O. de Castro García, I. | |
An optional APU for passenger aircraftPARTNER: CEAS |
Scholz, Dieter (Hamburg University of Applied Sciences) | |
An Overview of Hot Gas Ingestion Research at the University of BathPARTNER: EUROTURBO |
Lock, G.D. Owen , J.M. Sangan , C.M. Scobie , J.A. | |
Analysing Non-Synchronous Blade Vibrations in a Transonic Compressor RotorPARTNER: EUROTURBO |
Holzinger, F. Jüngst, M. Leichtfuss, S. Schiffer, H.-P. | |
Analysis Of Aircraft Configurations Including Propagated UncertaintiesPARTNER: CEAS |
Pfeiffer, Till (German Aerospace Center DLR), Moerland, E., Böhnke, D. (German Aerospace Center DLR) | |
Analysis of Dirichlet-Robin Interface Condition in Transient Conjugate Heat Transfer Problems. Application to a Flat Plate with Convection.PARTNER: EUROTURBO |
Baillis, D. Errera, M. Gimenez, G. Smith, Y. | |
Analysis of Electric Propulsion for De-Orbiting of Sun-Synchronous SatellitesPARTNER: CEAS |
Fromm, Christian (German Aerospace Center DLR), Herbertz, A. (DLR) | |
Analysis of Losses in Centrifugal Pumps with Low Specific Speed with Smooth and Rough wallsPARTNER: EUROTURBO |
Bleeck, S. Juckelandt, K. Wurm, F.-H. | |
Analysis of the flow in a propulsion nozzle subjected to a fluid injectionPARTNER: CEAS |
Chellou, Nassir (Hassiba Benbouali University of Chlef), Benarous, A, Guendez, M. (Hassiba Benbouali University of Chlef) | |
Analysis of the Flow Structure in a Radial Turbine.PARTNER: EUROTURBO |
Marsan, A. Moreau, S. | |
Analysis of the Influence of Periodic Passing Wakes on the Secondary Flow near the Endwall of a Linear LPT Cascade usign DNS and U-RANSPARTNER: EUROTURBO |
Ciorciari, R. Fröhlich, J. Koschichow, D. Niehuis, R. | |
Analysis of the NASA Common Research Model European Transonic Wind Tunnel Test Data and NASA Test DataPARTNER: CEAS |
Rivers, Melissa (NASA Langley Research Center), Quest, J.Q. (European Transonic Windtunnel), Rudnik, RR (German Aerospace Center DLR) | |
Analysis of variable Geometry Nozzle Flow with Twisted Vanes in Radial TurbinesPARTNER: EUROTURBO |
Belkouchi, B. Binder, N. Bousquet, Y. Carbonneau, X. | |
Analytical Loss Prediction for Turbocharger CompressorsPARTNER: EUROTURBO |
Bühler, J. Hanna, M. Leichtfuß, S. Schiffer, H.-P. Schneider, M. | |
ANDROID Small Active Debris Removal MissionPARTNER: CEAS |
Escorial Olmos, Diego (GMV Aerospace and Defence SAU), Peters, T.V.P. (GMV Aerospace and Defence SAU), Naudet, J. (QinetiQ Space), Chitu, C.C. (GMV Romania), Sewerin, J.K., Barcinski, T. (Centrum Badari Kosmicznych Polskiej Akademii Nauk) | |
Application of an Analytical Noise Models Using Numerical and Experimental Fan DataPARTNER: EUROTURBO |
Carolus, T. Moreau, S. Sanjose, M. Sturm, M. | |
Application of Frequency-Limited Adaptive Quadrocopter ControlPARTNER: CEAS |
Scheper, Kirk Y. W.; Magree, Daniel; Yucelen, Tansel; De La Torre, Gerardo; Johnson, Eric N. | |
Application Of The Non-Linear Harmonic Method To Flutter Calculation In Multi-Row TurbomachineryPARTNER: EUROTURBO |
Coussement, G. Debrabandere, F. Hirsch, Ch. Tartinville, B. Vilmin, S. | |
Assessment of aircraft noise sources variability using an acoustic cameraPARTNER: CEAS |
Merino Martinez, Roberto (Delft University of Technology), Snellen, M.S., Simons, D.G. (Delft University of Technology TUD) | |
Auralization of novel aircraft configurationsPARTNER: CEAS |
Arntzen, Michael (National Aerospace Laboratory NLR), Bertsch, L. (DLR), Simons, D.G. (Delft Technical University) | |
Automatic Control Generation for Aircraft Taxi Systems through Nonlinear Dynamic Inversion of Object Oriented ModelPARTNER: CEAS |
Re, Fabrizio | |
Automatic Landing System of a Quadrotor UAV Using Visual ServoingPARTNER: CEAS |
Ho, Hann Woei; Chu, Qiping | |
Automatic UAV Landing with Ground Target Maintained in the Field of ViewPARTNER: CEAS |
Burlion, Laurent; de Plinval, Henry | |
Automation in Aerospace Composites: State at NLR and future developmentsPARTNER: CEAS |
Thuis, Bert (National Aerospace Laboratory - NLR) | |
Autonomous flying: a must for the futurePARTNER: CEAS |
Graaff, Adriaan (AD Cuenta) | |
Autonomous planning and replanning of a single Unmanned Aerial Vehicle: strategies and simulationsPARTNER: CEAS |
Fusaro, Roberta (Politecnico di Torino), Boggero, L., Cresto Aleina, S., Viola, N. (Politecnico di Torino) | |
Autonomous robotic system for active debris removal: requirements, state-of-the-art and concept architecture of the rendezvous and capture (RVC) control architecture/systemPARTNER: CEAS |
Jankovic, Marko (German Research Center for Artifial Intelligence (DFKI GmbH) / University of Bremen), Kumar, K., (Dinamica Srl) Romero Martin, J., Vasile, M. (Strathclyde University), Ortiz Gómez, N., Walker, S.J.I. (Southampton University), Kirchner, F. (DFKI), Topputo, F. (Politecnico di Milano) | |
Autonomous Wind Tunnel Free-Flight of a Flapping Wing MAVPARTNER: CEAS |
De Wagter, Christophe; Koopmans, Andries; de Croon, Guido; Remes, Bart; Ruijsink, Rick | |
Aviation – Environmental Threats Simplified methodology of NOx and CO emissions estimationPARTNER: CEAS |
Glowacki, Pawel (Institute of Aviation), Czyz, S., Kawalec, M. | |
Blade Tip Clearance and Blade Vibration Measurements using a Magnetoresistive SensorPARTNER: EUROTURBO |
Brouckaert, J.F. Rossi, G. Tomassini, R. | |
Boundary Layer Suction for Secondary Flow Control in a Compressor Cascade at Off Design ConditionsPARTNER: EUROTURBO |
Liesner, K. Meyer, R. | |
Buoyancy Effects at High Rotation Number on the Flow Field Inside a Triangular Shaped Rib Roughened ChannelPARTNER: EUROTURBO |
Armellini, A. Casarsa, L. Furlani, L. | |
Carbon Dioxide Emissions from Air Traffic Internal to Industrialised States and between themPARTNER: CEAS |
Alain Garcia, Alain (Air and Space Academy), Rigaudias, Jean-Baptiste (retired Air France VP Environment) | |
CFD Studies on Smooth and Rough Airfoil Surfaces and Their Effects on Laminar Turbulent Transition and Heat TransferPARTNER: EUROTURBO |
Cottier , F. Lutum , E. Semmler, K. | |
CFD Study on Special Duties Centrifugal Pumps Operating with Viscous And Non-Newtonian FluidsPARTNER: EUROTURBO |
Buratto, C. Pinelli, M. Spina, P.R. Vaccari, A. Verga, C. | |
CFD-Based Investigation of Turbine Tonal Noise Induced by Steady Hot StreaksPARTNER: EUROTURBO |
Ashcroft, G. Guérin, S. Holewa, A. Lesnik, S. | |
Challenges in Introduction and Certification of Thick-Walled Composite Components in Landing GearPARTNER: CEAS |
Sijpkens, Tjaard (Fokker Landing Gear), Smeets, Mike (Fokker Landing Gear) | |
Characterisation of Material Demisability for Spacecraft ComponentsPARTNER: CEAS |
Merrifield, Jim (Fluid Gravity Engineering), Jams Beck (2Belstead Research Limited), Georg Herdrich Adam S. Pagan (University of Stuttgart), Volker Liedtke (Aerospace & Advanced Composites), Benoit Bonvoisin (ESA) | |
Characteristics of locked and free-wheeling ducted fan based on wind tunnel tests and CFD analysesPARTNER: CEAS |
Rodzewicz, Miroslaw (Warsaw University of Technology), Bogdanski, Krzysztof. (Warsaw University of Technology) | |
Characteristics of Turbulence in a High Speed Low Pressure Turbine Rig Using Hot-Wire AnemometryPARTNER: EUROTURBO |
Cadrecha, D. Pinilla, V. Torre, D. | |
Characterization of Secondary Flows in a High Blockage Ratio Internal Cooling ChannelPARTNER: EUROTURBO |
Arts, T. Cildir , O. Mayo, I. | |
Citric acid aerospace stainless steel passivation: a green approachPARTNER: CEAS |
Bragaglia, Mario (University of Rome Tor Vergata""), Rinaldi,M. (University of Rome Tor Vergata""), Cacciotti, I. (University of Rome Niccolò Cusano""), Mori, S., Nanni, F., Montesperelli, G. (University of Rome Tor Vergata"") | |
Clean Sky Technology Evaluator – Air Transport System assessmentsPARTNER: CEAS |
Junior, Alf (German Aerospace Center DLR) | |
Clean Sky Technology Evaluator – Noise assessment and experience at airport levelPARTNER: CEAS |
Eenige, Michel (National Aerospace Laboratory NLR) | |
CleanSat: the Clean Space’s response to the space debris situationPARTNER: CEAS |
Soares (European Space Agency) | |
Clusterization of airport cities and cluster dynamics for an air passenger demand network topology forecast based on socio-economic development scenarioPARTNER: CEAS |
Terekhov, Ivan (German Aerospace Center DLR), Gollnick, V G (DLR, Air Transportation Systems) | |
Combined Launch System: a new concept to reduce the launch costs for Micro (Cube) Satellites and Debris hunting probesPARTNER: CEAS |
Ahmed, Hamed (Cairo University) | |
Comparative Analyses of Micro-Particle Impact between Transonic and Subsonic Axial CompressorsPARTNER: EUROTURBO |
Aldi, N. Morini, M. Pinelli, M. Spina, P. R. Suman, A. | |
Comparative study of European RPAS regulationsPARTNER: CEAS |
Cuerno-Rejado, Cristina (Technical University of Madrid), Sanchez-Carmona, A. (Universidad Politécnica de Madrid) | |
Comparison of an Acoustically Optimized and an Aerodynamically Optimized Exit Guide VanePARTNER: EUROTURBO |
Heitmeir, F. Hoeger, M. Marn, A. Schönleitner, F. Selic, T. | |
Comparison of Different Methods for the Analysis of Time-Resolved Flow Field Measurements in an Axial TurbinePARTNER: EUROTURBO |
Henke, M. Kluge, T. Seume, J. R. | |
Comparison of Nonlinear Dynamic Inversion and Backstepping Controls with Application to a QuadrotorPARTNER: CEAS |
Wang, Jian; Holzapfel, Florian; Peter, Florian | |
Comparison of the Potential Environmental Impact Improvements of Future Aircraft Concepts Using Life Cycle AssessmentPARTNER: CEAS |
Johanning, Andreas (Hamburg University of Applied Sciences), Scholz, D. (Hamburg University of Applied Sciences) | |
Comparisons Between Experimental Measurements and RANS-Based Simulations on the Aerodynamics of a Horseshoe Vortex ConfigurationPARTNER: EUROTURBO |
Geniketzidis, A.I. Georgiou, D.P. Milidonis, K.F. | |
CompoWorld: an innovative approach to innovation and economic developmentPARTNER: CEAS |
Veldman, Bouke (Stichting CompoWorld) | |
Computation of Thermodynamic Cycle for Novel Detonation Aircraft EnginePARTNER: CEAS |
Cuciumita, Cleopatra (Romanian Research and Development Institute for Gas Turbines COMOTI), Porumbel,I. (COMOTI Romanian Research and Development Institute for Gas Turbines) | |
Conception of service offers: from strategy to technology and the other way around.PARTNER: CEAS |
The case of Health and Usage Monitoring Systems (HUMS) in the management of missiles stockpilesNicolay, Alexis (MBDA France), Chiquier, J.-M. (MBDA) | |
Conception of Sub-Optimal Solution for Spacecraft Rendezvous Near an Elliptic OrbitPARTNER: CEAS |
Felisiak, Piotr; Sibilski, Krzysztof | |
Concurrent Learning Adaptive Model Predictive ControlPARTNER: CEAS |
Chowdhary, Girish; Mühlegg, Maximilian; How, Jonathan P.; Holzapfel, Florian | |
Conjugated Heat Transfer Simulation for Electrical Driven Fan SystemsPARTNER: EUROTURBO |
Beddadi, Y. Demory, B. Henner, M. | |
Constrained Adaptive Control with Transient and Steady-State Performance GuaranteesPARTNER: CEAS |
Schatz, Simon Philipp; Yucelen, Tansel; Johnson, Eric N. | |
Contributing to Orbital Sustainability with an Independent Decommissioning Device for Satellite and Launcher Space Implementing Space Debris Mitigation MeasuresPARTNER: CEAS |
Antonetti, Stefano (D-ORBIT), Ferrario, L.F., Rossettini, LR (D-ORBIT SRL) | |
Cooling channel flow characterization using Particle Image Velocimetry and Laser Induced FluorescencePARTNER: CEAS |
Rochlitz, Henrik (TU Braunschweig), Scholz,P.S. (TU Braunschweig) | |
Cooperative Autonomous Collision Avoidance System for Unmanned Aerial VehiclePARTNER: CEAS |
Jenie, Yazdi Ibrahim; van Kampen, Erik-Jan; Remes, Bart | |
Damage identification in composite panels using acousto-ultrasonic wavesPARTNER: CEAS |
Loendersloot, Richard (University of Twente) | |
Decentralized Energy Management for Spacecraft Attitude DeterminationPARTNER: CEAS |
Amini, Rouzbeh; Gill, Eberhard; Lisowski, Jakub | |
Decision-making inconsistencies in ATC: an empirical investigation into reasons for rejecting decision support automationPARTNER: CEAS |
Westin, Carl (Delft University of Technology), Borst, C. (Delft Technical University), Hilburn, (Center for Human Performance Research) | |
Decoupling the Eye: A Key Toward a Robust Hovering for Sighted Aerial RobotsPARTNER: CEAS |
Manecy, Augustin; Juston, Raphaël; Marchand, Nicolas; Viollet, Stephane | |
Design and analysis of the control and stability of a Blended Wing Body aircraftPARTNER: CEAS |
Merino Martinez, Roberto (Polytechnic University of Madrid UPM) | |
Design and Flight Testing of Nonlinear Autoflight Control Laws Incorporating Direct Lift ControlPARTNER: CEAS |
Lombaerts, Thomas; Looye, Gertjan | |
Design and Operation of a Low Speed Test Turbine FacilityPARTNER: EUROTURBO |
Arcangeli, L. Dossena, V. Gaetani, P. Gerbi, F. Maceli, N. Mora, A. Osnaghi, C. Paradiso, B. Quadrelli, R. | |
Design and optimisation methodologies for Additive Layer Manufacturing (ALM) considering uncertaintiesPARTNER: CEAS |
Azevedo, José (CEIIA), Alves, N.A. (Instituto Politécnico de Leiria IPL), Santos, RS (Instituto Superior Técnico IST), Mortágua, JPM (CEIIA) | |
Design and Verification of a Micro Wells Turbine for Mediterranean OperationsPARTNER: EUROTURBO |
Bassetti, M. Corsini, A. Delibra, G. Rispoli, F. Ruggeri, M. Venturini, P. | |
Design Guidelines for Low Pressure Axial Fans Based on CFD-Trained Meta-ModelsPARTNER: EUROTURBO |
Bamberger, K. Carolus, T. | |
Design of a Waypoint Tracking Control Algorithm for Parachute-Payload SystemsPARTNER: CEAS |
Gursoy, Gonenc; Prach, Anna; Yavrucuk, Ilkay | |
Design of an Engine Quickstart System for Rotorcraft ApplicationPARTNER: EUROTURBO |
Erhard, W. Kerler, M. Schäffer, C. | |
Design of Next Generation Snow Gun FansPARTNER: EUROTURBO |
Corsini, A. Delibra, G. Sciulli, F. | |
Design of UAV for photogrammetric mission in Antarctic areaPARTNER: CEAS |
Goetzendorf-Grabowski, Tomasz (Warsaw University of Technology), Rodzewicz, M.R. (Warsaw University of Technology) | |
Design, implementation and evaluation of a system to support Well ClearPARTNER: CEAS |
Theunissen, Erik (Netherlands Defence Academy), Suarez, B (General Atomics Aeronautical Systems Inc.) | |
Detection of Abnormal Aircraft Control Surface Position Using a Robust Parametric TestPARTNER: CEAS |
Gheorghe, Anca; Zolghadri, Ali; Cieslak, Jérôme; Henry, David; Goupil, Philippe; Dayre, Remy; Le-berre, Hervé | |
Deterministic Analysis of Vane-Blade Interactions in Self-Rectifiying Radial Turbines for OWC PlantsPARTNER: EUROTURBO |
Fernández Oro , J.M. Galdo Vega, M. Pereiras García , B. | |
Developing a standardised methodology for space-specific Life Cycle AssessmentPARTNER: CEAS |
Austin, Julian (European Space Agency), Jakob Huesing (Rhea for European Space Agency), Tiago Soares (European Space Agency), LuisaInnocenti (European Space Agency) | |
Developing Generic Flight Schedules for Airport ClustersPARTNER: CEAS |
Bießlich, Peter (Hamburg University of Technology), Gollnick, V.G. (Hamburg University of Technology) | |
Development and Application of an Integrated Aero-Mechanical Design Methodology for a Bladed Drum Low-Pressure CompressorPARTNER: EUROTURBO |
Carton, L. Hiernaux, S. Iliopoulou, V. Leborgne, M. Lonfils, T. | |
Development of a Certification Module tailored to Aircraft Multidisciplinary Design OptimizationPARTNER: CEAS |
Peter Schmollgruber (ONERA/DCPS) | |
Development of laser beam welding concepts for fuselage panelsPARTNER: CEAS |
Kashaev, Nikolai (Helmholtz-Zentrum Geesthacht), Riekehr, S., Falck, R., Enz, J. (Helmholtz-Zentrum Geesthacht), Robson, J., Tian, Y. (The University of Manchester, School of Materials), Karanika, A. (Hellenic Aerospace Industry S.A., Research and Product Design) | |
Dispersion and chemical composition of Athena II rocket plumes: Model simulations versus in-situ aircraft measurementsPARTNER: CEAS |
Bekki, Slimane (OVSQ), Cariolle, D.C. (CERFACS), Guenot, L.G. (Herakles), Murray, N.M. (ESA/ESTEC), Toumi, R.T. (Imperial College) | |
Dynamic Measurements on the NASA CRM Model tested in ETWPARTNER: CEAS |
Hensch, Ann-Katrin (European Transonic Windtunnel ETW), Quix, H. (ETW) | |
Dynamic Trajectory Control of GlidersPARTNER: CEAS |
Dilao, Rui; Fonseca, Joao | |
Eco-Space Project - Environmental Impact of new technologiesPARTNER: CEAS |
Saint-Amand, Maud (Airbus Defence and Space), Ouziel, J.O. (Airbus Defence & Space) | |
Ecodesign for space and aerospace: what happens when we make ecodesign relevant for demanding applications?PARTNER: CEAS |
Pettersen, Johan Berg (Asplan Viak), Bergsdal, H. (Asplan Viak), Bjørnbet, M.M. (Sintef Raufoss Manufacturing), Silva, E.J. (ISQ), Ringen, G. (Sintef Raufoss Manufacturing), Estrela, M.A. (ISQ) | |
Economical Assessment of Commercial High-Speed TransportPARTNER: CEAS |
Margaretic, Paula (Airbus Operations), Steelant, J.S. (Johan Steelant) | |
Effects of Realistic Inflow Conditions on the Aero-Thermal Performance of a Film-Cooled VanePARTNER: EUROTURBO |
Griffini, D. Insinna, M. Martelli, F. Salvadori, S. | |
Effects of Training Strategies on Acquiring and Retaining Manual Control SkillsPARTNER: CEAS |
Popovici, Alexandru (San Jose State University, NASA Ames Research Center), Zaal, M.T. (San Jose State University, NASA Ames Research Center) | |
Entropy Wave Generator for Indirect Combustion Noise Experiments in a High-Pressure TurbinePARTNER: EUROTURBO |
Gaetani, P. Niculescu, F. Persico, G. Sandu, C. Spinelli, A. | |
Environmental prospects in aviation: a study from the Air & Space Academy FCPARTNER: CEAS |
Joselzon, Alain (Air and Space Academy) | |
ESA green propulsion progressPARTNER: CEAS |
Valencia-Bel, F. (European Space Agency), D. Greuel, A. Gernoth (ESA) | |
ESA’s e.deorbit mission and its roadmap to Active Debris RemovalPARTNER: CEAS |
Biesbroek, Robin (European Space Agency) | |
Estimation of Nonlinear Parameters from Simulated Data of an AircraftPARTNER: CEAS |
Dhayalan, R | |
Estimation of Turbine Noise Benefits Due to Acoustically Treated Outlet Guide VanesPARTNER: EUROTURBO |
Serrano, A. Torres, G. | |
ESWIRP: European Strategic Wind tunnels Improved Research Potential – Program OverviewPARTNER: CEAS |
Boyet, Guy (ONERA) | |
EU environmental regulation and the space sector: an overviewPARTNER: CEAS |
Ariaudo, Paolo (PWC), Scatteia, Luigi (PWC) | |
European Personal Aero-Transportation. Using of the Double-Flutter Flight Principle for Manufacturing of Personal Flying-Cars by European Aircraft and Car ManufacturersPARTNER: CEAS |
Sandu, Constantin (Romanian Research and Development Institute for Gas Turbines COMOTI), Brasoveanu, D. (Orbital ATK), Voicu, R., Deaconu, M., Cican, G., Zavodnic, F. (COMOTI) | |
Evaluation of Two Unsteady Numerical Approaches for the Simulation of Multi-Frequency Turbomachinery FlowsPARTNER: EUROTURBO |
Castillon, L. Gourdain, N. Guédeney, T. Sicot, F. | |
Exhaust Flow Pulsation Effect on Radial Turbine PerformancePARTNER: EUROTURBO |
Fj¨allman, J. Fuchs, L. Mihaescu, M. | |
Experiences with the Barracuda UAV Auto Flight SystemPARTNER: CEAS |
van Tooren, Joost; Hammon, Reiner | |
Experimental Analysis of Instability Phenomena in a High-Head Reversible Pump-Turbine at Large Partial Flow ConditionPARTNER: EUROTURBO |
Ardizzon, G. Cavazzini, G. Pavesi, G. Yang, J. | |
Experimental and Numerical Determination of Pressure and Velocity Distribution Inside a Rotor-Stator Cavity at Very High Circumferential Reynolds NumbersPARTNER: EUROTURBO |
Barabas, B. Benra, F.K. Brillert, D. Clauss, S. Dohmen, H. J. Schuster, S. | |
Experimental and Numerical Evaluation of the NPSHr Curve of an Industrial Centrifugal PumpPARTNER: EUROTURBO |
Cappelletti, A. Martelli, F. Montomoli, F. Nicchio, A. Salvadori, S. | |
Experimental and Numerical Flow Investigation of a Centripetal Supersonic Turbine for Organic Rankine Cycle ApplicationsPARTNER: EUROTURBO |
Althaus, W. Buelten, B. Stoff, H. Weidner, E. | |
Experimental and Numerical Study of a Gas Turbine Exhaust Diffuser Applying Different Hub Extension GeometriesPARTNER: EUROTURBO |
Finzel, C. Hofmann, W. H. Rasouli Ghazi Kalayeh, K. Schäfer, P. | |
Experimental Characterization of Stall Phenomena in a Single Stage Low Pressure Axial CompressorPARTNER: EUROTURBO |
Brouckaert, J.F. Dell'Era, G. Desset, J. Habotte, N. Hiernaux, S. | |
Experimental Flow and Performance Investigations of Cavity Purge Flows in a High Pressure Turbine StagePARTNER: EUROTURBO |
Dahlqvist , J. E. Fridh, J. | |
Experimental Identification of Rotating Instability on an Axial Fan with Shrouded RotorPARTNER: EUROTURBO |
Enghardt, L. Moreau, A. Pardowitz, B. Tapken, U. | |
Experimental Investigation of Flow within a Rotor Stator CavityPARTNER: EUROTURBO |
Bavassano, F. Facchini, B. Mantero, M. Massini, D. Micio, M. | |
Experimental Investigation of Small Scale Homogeneous Isotropic Turbulence in S1MA wind tunnelPARTNER: CEAS |
Bourgoin, Mickael (LEGI / CNRS), Barois, T, Baudet, C.B., Mordant, N.M. (LEGI / CNRS) | |
Experimental investigations based on a demonstrator unit to analyse the combustion process of a nitrous oxide/ethene premixed green bipropellantPARTNER: CEAS |
Werling, Lukas (German Aerospace Center DLR), Perakis, N., Hochheimer, B.I.J., Gernoth, A., Schlechtriem, S. (German Aerospace Center DLR) | |
Experimental Investigations of Secondary Flow Development Around Tandem Vanes in a 2D Linear Stator Compressor CascadePARTNER: EUROTURBO |
Heinrich, A. Peitsch, D. Tiedemann, C. | |
Experimental Research on Flow in a 5-Stage High Pressure Rotor of 1000 MW Steam TurbinePARTNER: EUROTURBO |
Bednár , L. Hoznedl, M. Miczán , M. Tajc, L. | |
Experimental Studies of Liquid Film Suction from Turbine Stator Blade Surface in Wet Steam FlowPARTNER: EUROTURBO |
Gavrilov , I.Y. Gribin , V.G. Khomyakov , S.V. Popov , V.V. Sorokin, I.Y. Tishchenko, A.A. Tishchenko , V.A. | |
EXPLIC Program EXPloration of the LImits of a "drop-in" jet fuelPARTNER: EUCASS |
Mickaël Sicard | |
Facility for Investigating the Flow in a Low Pressure Turbine Exit StructurePARTNER: EUROTURBO |
Arroyo, C. Chernoray, V. Kristmundsson, D. Larsson, J. Rojo, B. | |
Fault Tolerant Control of Octorotor Using Sliding Mode Control AllocationPARTNER: CEAS |
Alwi, Halim; Edwards, Christopher | |
Fault-Tolerant Spacecraft Magnetic Attitude ControlPARTNER: CEAS |
Sadon, Aviran; Choukroun, Daniel | |
FEM analyses of joined wing aircraft configurationPARTNER: CEAS |
Mieloszyk, Jacek (Warsaw University of Technology), MSc Kalinowski, M. (Warsaw University of Technology) | |
Film Cooling Effectiveness Measurements on Engine Representative Trailing Edge Slots including Cutback Surface ProtuberancesPARTNER: EUROTURBO |
Ireland, P.T. Self, K.P. Wong, T.H. | |
Findings and conclusions from the AtILA projectPARTNER: CEAS |
Murray,N. (European Space Agency) | |
Flat Plate Honeycomb Seals Acoustic AnalysisPARTNER: EUROTURBO |
Bianchini, C. Ceccherini, A. Facchini, B. Innocenti, L. Massini, D. Micio, M. | |
Flight Control Algorithms for a Vertical Launch Air Defense MissilePARTNER: CEAS |
Tekin, Raziye | |
Flight Envelope Protection for Automatic and Augmented MAnual ControlPARTNER: CEAS |
Lambregts, Antonius, Adrianus | |
Flight Guidance and Control of a Tethered Airplane in an AirborneWind Energy ApplicationPARTNER: CEAS |
Sieberling, Sören | |
Flight Management System improvement : Optimized Steps in cruisePARTNER: CEAS |
Delpy, Patrick (Thales) | |
Flight Nutation Validation of the COS-B and EQUATOR-S SpacecraftPARTNER: CEAS |
Kuiper, Hans | |
Flight Test Oriented Autopilot Design for Improved Aerodynamic Parameter IdentificationPARTNER: CEAS |
Krings, Matthias; Henning, Karsten; Thielecke, Frank | |
Flight-physical aspects and methods of future military aircraft designsPARTNER: CEAS |
Hitzel, Stephan Maria (Airbus Defence and Space) | |
Flow Analysis of the Turbine Rotor Tip Seal on a Highly Rotary Tes RigPARTNER: EUROTURBO |
Dykas, S. Szymanski, A. Wróblewski, W. | |
Forced Response Analysis of a Transonic Turbine Using a Free Interface Component Mode Synthesis MethodPARTNER: EUROTURBO |
Andersson, C. Fransson, T. H. Gezork, T. Gutierrez, M. Vogt, D. M. Yang, S. | |
Fuselage aerodynamic drag prediction method by cfdPARTNER: CEAS |
Della Vecchia, Pierluigi (University of Naples Federico II""), Nicolosi, F., Ciliberti, D., Cusati, V. (University of Naples) | |
Future of AviationPARTNER: CEAS |
Szodruch, Joachim (IFAR), Shin, Jai (NASA), Nakahashi, K.N. (Japan Aerospace Exploration Agency) | |
Future SkyPARTNER: CEAS |
Eijssen, Paul (EREA) | |
Future wing Hybrid Laminar Flow Control suction system design and analysisPARTNER: CEAS |
Alderman, James (Airbus Group Innovations) | |
GARTEUR Structures & Materials Action Group 32 – An European Research Project On Damage Growth In Aerospace Composite StructuresPARTNER: CEAS |
Riccio, Aniello (Second University of Naples) | |
Gas Turbine Performance Diagnostics and Fault Isolation Based on Multidimensional Complex Health Vector SpacePARTNER: EUROTURBO |
Panov, V. | |
Generic TECS Based Autopilot for an Electric High Altitude Solar Powered AircraftPARTNER: CEAS |
Kastner, Nir; Looye, Gertjan | |
GN&C Engineering Lessons Learned from Human Space Flight Operations ExperiencesPARTNER: CEAS |
Dittemore, Gary; Dennehy, Neil | |
GNC Aspects for Active Debris RemovalPARTNER: CEAS |
Colmenarejo, Pablo; Binet, Giovann; Strippoli, Luigi; Peters, Thomas V.; Graziano, Mariella | |
GNC Challenges and Navigation Solutions for Active Debris Removal MissionPARTNER: CEAS |
Kervendal, Erwan; Chabot, Thomas; Kanani, Keyvan | |
Green Solid Propellants for LaunchersPARTNER: CEAS |
Wingborg, Niklas (Swedish Defence Research Agency, FOI) | |
Ground Test Vibrations as non-conservative mean of compliance for vibration airworthiness requirements of A/C mechanical systems designPARTNER: CEAS |
Palomares, Angel (Airbus Defence and Space) | |
Gurney Flaps on Axial PumpsPARTNER: EUROTURBO |
Hammer, S. Peter, J. Stiller, V. Thamsen, P. U. | |
Gyro Bias Estimation Using a Dual Instrument ConfigurationPARTNER: CEAS |
Ruizenaar, Marcel; van der Hall, Elwin; Weiss, Martin | |
Hardware-In-The-Loop – an Essential Part of the Development Process for the Automatic Flight Control System of a Utility AircraftPARTNER: CEAS |
Boche, Bernd; Kaden, Andre; Luckner, Robert | |
Heat Transfer Characteristics of High Crossflow Impingement Channels: Effect of Number of HolesPARTNER: EUROTURBO |
Cochet, M. Llucià, S. Ott, P. Terzis, A. | |
High Order SPH-ALE Method for Hydraulic Turbine SimulationsPARTNER: EUROTURBO |
Aubert, S. Marongiu, J-C. Renaut, G-A. | |
High-Speed PIV Applied to the Wake of the NASA CRM Model in ETW at High Re-Number Stall Conditions for Sub- and Transonic SpeedsPARTNER: CEAS |
Konrath, Robert () | |
Hot-Wire Measurements in a Direct Driven High Speed Turbo Fan (DDTF) RigPARTNER: EUROTURBO |
Hakansson, S. Knobloch, K. Meyer, R. | |
Impact of additive manufacturing on spacecraft engine designPARTNER: CEAS |
Hyde (European Space Agency) | |
Impact of rocket launches on chemical and aerosol composition of the atmospherePARTNER: CEAS |
Sofiev, Mikhail (Finnish Meteoeological Institute), Wood, C (Finnish Meteorological Institute), Vira, J., Kouznetsov, R. , Tarvainen, V. (Finnish Meteorological Institute), Grenard, P., Ordonneau, G (ONERA) | |
Impacts of a Prognostics and Health Management System on Aircraft Fleet Operating Cost during Conceptual Design Phase by using Parametric EstimationPARTNER: CEAS |
Fioriti, Marco (Politecnico di Torino), Pavan, G. (Alenia Aermacchi), Corpino, S., Fusaro, R. (Politecnico di Torino) | |
Implementation of GNSS-based RNAV-flight procedures – quantification of potential benefits for business aviation usersPARTNER: CEAS |
Böck, Philipp (Intraplan Consult), Schubert, M. (Intraplan Consult GmbH) | |
Improving the Design of Steam Turbine Inlet Valves by Numerical Methods for Enhanced Part Load OperationPARTNER: EUROTURBO |
Benra, F.K. Brillert, D. Dohmen, H. J. Domnick, C. B. Musch, C. | |
Improving the Performance of an Actuator Control Scheme During SaturationPARTNER: CEAS |
Lo, Chang How; Shin, Hyo-Sang; Tsourdos, Antonios; Kim, Seung-Hwan | |
Incremental Backstepping for Robust Nonlinear Flight ControlPARTNER: CEAS |
Acquatella B., Paul; Van Kampen, Erik-Jan; Chu, Qiping | |
Influence of a Multi-Hole Pressure Probes on the Flow-Field in Axial-TurbinesPARTNER: EUROTURBO |
Aschenbruck, J. Hauptmann, T. Seume, J.R. | |
Influence of Acoustic Reflection on Flutter Stability of an Embedded Blade RowPARTNER: EUROTURBO |
Nipkau, J. Vahdati, M. Zhao, F. | |
Influence of Honeycomb Rubbing on Tip Seal Performance of Turbine RotorPARTNER: EUROTURBO |
Chmielniak, T. Fraczek, D. Wróblewski, W. | |
Influence of the Thermal Boundary Conditions on the Heat Transfer of a Rib-Roughened Cooling Channel using LESPARTNER: EUROTURBO |
Duchaine, F. Gicquel, L. Y. M. Scholl, S. Torres-Garcia, J. Verstraete, T. | |
Integrated Flow Simulation of the Fan and High-Pressure Compressor Stages of a Turbofan at WindmillPARTNER: EUROTURBO |
Dufour, G. García Rosa, N. Margalida, G. | |
Integrated Modelling of an Unmanned High-Altitude Solar-Powered Aircraft for Control Law Design AnalysisPARTNER: CEAS |
Klöckner, Andreas; Leitner, Martin; Schlabe, Daniel; Looye, Gertjan | |
Integrated multidisciplinary engineering solutions at Fokker AerostructuresPARTNER: CEAS |
Berg, Tobie (Fokker Aerostructures), Laan, A.H., Hootsmans, L.M. (Fokker Aerostructures) | |
Integrating sustainability in the design of space activities: development of eco-design tools for space projectsPARTNER: CEAS |
Chanoine, Augustin (Deloitte), Le Guern, Y., Witte, F. (Deloitte) | |
Integration of Mission Trajectory Management functions into CleanSky Technology Evaluation ProcessPARTNER: CEAS |
Cadot-Burillet, Delphine (Airbus Operations), Albert, M.A. (Airbus Operations) | |
Interactive 3D Visualization to Support Concurrent Engineering in the Early Space Mission Design PhasePARTNER: CEAS |
Deshmukh, Meenakshi (German Aerospace Center DLR), Wolff, R., Fischer, P.M., Flatken, M., Gerndt, A. (German Aerospace Center DLR) | |
Introducing Air to Air Refuelling (AAR) into Civil AviationPARTNER: CEAS |
Nangia, Raj (consultant) | |
Introducing eco-design to ESA - An overview of the activities towards a coherent eco-design approachPARTNER: CEAS |
Huesing, Jakob (European Space Agency), Julian Austin, Tiago Soares (European Space Agency) | |
Investigating Endwall-Blade Fillet Radius Variation to Reduce Secondary Flow LossesPARTNER: EUROTURBO |
Hawes, C. Ingram, G. Williams, R. | |
Investigating Unsteady Secondary Flows in Linear Low Pressure Turbine Cascade: a Combined Experimental and Numerical StudyPARTNER: EUROTURBO |
Ciorciari, R. Kirik, I. Niehuis, R. | |
Investigation of Manual Control Behaviour During Flight Control Mode Switching: Test Procedure and Preliminary ResultsPARTNER: CEAS |
Schönfeld, Andrej | |
Investigation of the Inlet Filter Influence on Unsteady Flow Phenomena in a Single-Stage Centrifugal BlowerPARTNER: EUROTURBO |
Horodko , L. Kabalyk, K. Kryllowicz, W. Liskiewicz, G. | |
Investigation of the Potential for Optimization of Hydraulic Axial Thrust Balancing Methods in a Centrifugal PumpPARTNER: EUROTURBO |
Herbers, T. Kowalski, J. Lefor, D. Mailach, R. | |
Investigation of Turbo Machinery and Jet Noise of the V2500 Engine During Ground Tests with an A320 AircraftPARTNER: EUROTURBO |
Bassetti, A. Funke, S. Siller, H. | |
Investigation on the Solid-Liquid Flow in the Rear Chamber of a Submersible Multi-Stage Slurry PumpPARTNER: EUROTURBO |
Benra, F.K. Hu, B. Lu, W. | |
Jumbo City FlyerPARTNER: CEAS |
Gangoli Rao, Arvind (Delft University of Technology), Eitelberg, G (DNW- German-Dutch Wind Tunnels) | |
L1 Adaptive Control for Systems with Matched Stochastic DisturbancePARTNER: CEAS |
Souanef, Toufik; Pinchetti, Federico; Fichter, Walter | |
Landing Gear Conceptual Design and Structural Optimization of a Large Blended Wing Body AircraftPARTNER: CEAS |
Cumnuantip, Sunpeth (German Aerospace Center DLR) | |
Lateral Fly by Wire Control System Dedicated to Future Small AircraftPARTNER: CEAS |
Heller, Matthias; Baier, Thaddäus; Schuck, Falko | |
LFT Model Generation Via L1-Regularized Least SquaresPARTNER: CEAS |
Pfifer, Harald; Hecker, Simon | |
Linear Parameter Varying Control of an Agile Missile Model Based on the Induced L2-Norm FrameworkPARTNER: CEAS |
Tekin, Raziye; Pfifer, Harald | |
Linear Quadratic Integrated vs. Separated Autopilot-Guidance DesignPARTNER: CEAS |
Levy, Maital; Shima, Tal; Gutman, Shaul | |
Longitudinal Control Law for Modern Long Range Civil AircraftPARTNER: CEAS |
Delannoy, Stephane; Oudin, Simon | |
Loss and Deviation in Windmilling FansPARTNER: EUROTURBO |
Gunn, E. J. Hall, C. A. | |
Mach number control improvement in ONERA s1ma large sonic wind tunnelPARTNER: CEAS |
Crozier, Pascal (ONERA), Chargy, C., Pichon, R. (ONERA) | |
Methodology for the Validation of Loads in Rational Turning AnalysisPARTNER: CEAS |
Chorro Martínez, José Manuel (Airbus Defence and Space), Parra Adan, S., Martínez Pérez, A.D., Gómez Viñas, J.E., Juan Antonio, J.A. (Airbus Group), Tito Carrillo, J. (Sertec) | |
Methods of flight-path planning for UAV photogrammetry missions with consideration of aircraft dynamic propertiesPARTNER: CEAS |
Glowacki, Dominik (Warsaw University of Technology), Hajduk ,J. (Air Force Institute of technology), Lis, M., Dziubinski, A., Krysztofiak, G (Institute of Aviation) | |
Micro Laser Sintering capabilities opens the door for long endurance flights supported by light weight and precise micro partsPARTNER: CEAS |
Winderlich, Matthias (3D MicroPrint), Goebner, J.G.. Blau, M.B.L., Weber, D.W.E., Starke, T.S.T., Schneck, M.S.C., Lehnhardt, A.L.E. (3D MicroPrint GmbH) | |
Model based system assessment and trajectory optimization on aircraft levelPARTNER: CEAS |
Re, F. (DLR), Schlabe, D., Müller, R. (German Aerospace Center DLR) | |
Model Formulation of Pursuit Problem with Two Pursuers and One EvaderPARTNER: CEAS |
Patsko, Valery, S.; Le Menec, Stephane; Kumkov, Sergey | |
Model Reference Adaptive Control of Mildly Non-Linear Systems with Time Varying Input Delays - Part IPARTNER: CEAS |
Nelson, James; Balas, Mark; Erwin, Richard | |
Model Reference Adaptive Control of Mildly Non-Linear Systems with Time Varying Input Delays - Part IIPARTNER: CEAS |
Nelson, James; Balas, Mark; Erwin, Richard | |
Modelling of Nonlinearities and Parasitic Effects in the Electro-Mechanical Command Transmission Path for a Real-Time Flight Simulation ModelPARTNER: CEAS |
Meyer-Brügel, Wolfram; Steckel, Florian; Luckner, Robert | |
Modelling the Influence of Vortex Shedding on Trailing Edge Cutback Film Cooling at Different Blowing RatiosPARTNER: EUROTURBO |
Barigozzi, G. Ravelli, S. | |
Modification of the Approaches to Flying Qualities and PIO Event PredictionPARTNER: CEAS |
Efremov, Alexander; Korovin, Alexander; Koshelenko, Alexander | |
Morphed vertical tailplane assessment for certification requirementsPARTNER: CEAS |
Castillo-Acero, Miguel Angel (Aernnova), Cuerno-Rejado, C., Gómez-Tierno, M.A. (Escuela Técnica Superior de Ingenieros Aeronáuticos, UPM) | |
Multi-Lifting-Device UAV Autonomous Flight at Any Transition PercentagePARTNER: CEAS |
De Wagter, Christophe; Dokter, Dirk; de Croon, Guido; Remes, Bart | |
Multidisciplinary design optimization of flight control system parameters in consideration of aeroelasticityPARTNER: CEAS |
Nussbächer, Daniel (Airbus Defence and Space), Hanel, M., Daoud, F. (Airbus Defence and Space), Hornung, M. (Technical University of Munich) | |
New Design Approach for a Highly Loaded Counter-Rotating Mixed-Flow Pump in Cavitation ConditionsPARTNER: EUROTURBO |
Dreiss, A. Friedrichs, J. Tosin, S. | |
New green polymer composites processed by Additive Manufacturing for “clean space” applicationsPARTNER: CEAS |
Rinaldi, Marianna (University of Rome Tor Vergata""), Cacciotti, I. (University of Rome Niccolò Cusano""), Pambaguian, L., Ghidini, T. (European Space Agency ESA-ESTEC), Canala, V., Massarelli, V. (Mecaer Aviation Group), Nanni, F. (University of Rome Tor Vergata"") | |
Next Generation of Civil Aircraft Engines Concepts & TechnologiesPARTNER: EUROTURBO |
Haselbach, F. | |
Noise predictions of a hypersonic air transport vehicle concept during the landing and take-off cyclePARTNER: CEAS |
Wijntjes, Rik (National Aerospace Laboratory NLR), Tuinstra, M (NLR), Taguchi, H (Japan Aerospace Exploration Agency) | |
Non-Cascaded Dynamic Inversion Design for Quadrotor Position Control with L1 AugmentationPARTNER: CEAS |
Wang, Jian; Holzapfel, Florian; Xargay, Enric; Hovakimyan, Naira | |
Non-Equilibrium Spontaneous Condensationi in Transonic Steam Flow Through Linear CascadePARTNER: EUROTURBO |
Dykas, S. Majkut, M. Smolka, K. Strozik, M. | |
Nonlinear Model Predictive Control Applied to Vision-Based Spacecraft LandingPARTNER: CEAS |
Izzo, Dario; de Croon, Guido | |
Nonlinear Non-Cascaded Reference Model Architecture for Flight Control Design with Flight Path Angle Rate Command SystemPARTNER: CEAS |
Zhang, Fubiao; Holzapfel, Florian; Heller, Matthias | |
Nonlinear Output-Feedback H-Infinity Control for Spacecraft Attitude ControlPARTNER: CEAS |
Capua, Alon; Berman, Nadav; Shapiro, Amir; Choukroun, Daniel | |
Numerical 3D RANS Simulation of Gas-Liquid Flow in a Centrifugal Pump with an Euler-Euler Two-Phase Model and a Dispersed Phase DistributionPARTNER: EUROTURBO |
Limbach, P. Müller, T. Skoda, R. | |
Numerical Analysis of Stator-Stator Interactions in a One and One-Half Stage High Pressure TurbinePARTNER: EUROTURBO |
Gougeon, P. Ngo Boum, G. | |
Numerical Analysis of the S-Shape Characteristic in a Pump-TurbinePARTNER: EUROTURBO |
Ardizzon, G. Cavazzini , G. Covi , A. Pavesi , G. | |
Numerical and Experimental Analysis of LP Steam Turbine Blades Coupled with Lacing WirePARTNER: EUROTURBO |
Drozdowski, R. Häfele, M. Vogt, D. M. Völker, L. | |
Numerical and Experimental Investigations on Subsonic Air Intakes with Serpentine Ducts for UAV ConfigurationsPARTNER: CEAS |
Berens, Thomas (Airbus Defence and Space), Delot, A.L. (ONERA), Tormalm, M.M. (Swedish Defence Research Agency (FOI)), Ruiz-Calavera, L.P., Funes-Sebastian, D.E. (AIRBUS Defence and Space), Rein, M. (DLR), Säterskog, M. (SAAB AB, Aeronautics) | |
Numerical and Experimental Study on Aerodynamic Optimization of Part-Span Connectors in the Last Stage of an LP Industrial Steam TurbinePARTNER: EUROTURBO |
Drozdowski, R. Grübel, M. Häfele, M. Schatz, M. Traxinger, C. Vogt, D. M. | |
Numerical Investigation of Rotor and Stator Clocking Effect Applied to a Rig-Model of Highly Loaded Two-Stage CompressorPARTNER: EUROTURBO |
Druzhinin, Ya. Mileshin, V. | |
Numerical Investigations of Different Tip Designs for Shroudless Turbine BladesPARTNER: EUROTURBO |
Caloni, S. Coull, J. D. Shahpar, S. | |
Numerical Simulation of Acoustic Liners in Nacelle Turbofans towards Aircraft Noise ReductionPARTNER: EUROTURBO |
Deconinck , T. Ferrante , P. Hirsch, C. Vilmin , S. | |
On the Acoustics of a Turning Mid Turbine Frame with Embedded Design in a Two-Stage Test-TurbinePARTNER: EUROTURBO |
Faustmann, C. Göttlich, E. Heitmeir, F. Marn, A. Spataro, R. Zerobin, S. | |
On the Crucial Role of the Estimation in Interception EndgamesPARTNER: CEAS |
Shinar, Josef; Turetsky, Vladimir | |
On the minimization of cruise drag due to pitch trimPARTNER: CEAS |
Campos, Luis (Instituto Superior Técnico), Marques, J.M.G.M. (Instituto Superior Técnico) | |
On thermo-acoustic acoustic-vortical-entropy waves and flow stabilityPARTNER: CEAS |
Campos, Luis (Instituto Superior Técnico), Marta, A.C.M. (Instituto Superior Técnico) | |
Online Estimation of Mean Orbital Elements with Control InputsPARTNER: CEAS |
Zhong, Weichao; Gurfil, Pini | |
Optimal Control Gain for Satellite Detumbling Using B-Dot AlgorithmPARTNER: CEAS |
Juchnikowski, Grzegorz; Barcinski, Tomasz; Lisowski, Jakub | |
Optimal Design of High Pressure Steam Turbine Stage using Computational Fluid DynamicsPARTNER: EUROTURBO |
Boiko, A. V. Maksiuta, D. I. | |
Oscillatory Failure Case Detection for Aircraft Using Non-Homogeneous Differentiator in Noisy EnvironmentPARTNER: CEAS |
Cieslak, Jérôme; Efimov, Denis; Zolghadri, Ali; Henry, David; Goupil, Philippe | |
Overall view of the European Collaboration in Aeronautics Research within GARTEURPARTNER: CEAS |
Consigny, Hervé (ONERA), Vasseur, O., Delot, A.L. (ONERA) | |
People, Planet, Profit: the Making of the Clean Sky 2 PPPPARTNER: CEAS |
van Manen, Ron (Clean Sky JU) | |
Performance Improvement of a High Pressure Steam Turbine by Optimizing the Exhaust Geometry Using CFDPARTNER: EUROTURBO |
Gloss, D. Hecker, S. Musch, Ch. Steinhoff, R. | |
Performance Measurements of a Full-Stage Centrifugal Process Gas Compressor Test RigPARTNER: EUROTURBO |
Franz, H. Jeschke, P. Rossbach, T. Rube, C. Wedeking, M. | |
POD Analysis of the Wake-Boundary Layer Unsteady Interaction in a LPT Blade CascadePARTNER: EUROTURBO |
Berrino, M. Lengani, D. Simoni, D. Ubaldi, M. Zunino, P. | |
Position Tracking of a Multicopter Using a Geometric Backstepping Control LawPARTNER: CEAS |
Falconí, Guillermo P.; Holzapfel, Florian | |
Prediction of Deposit and Erosion Mechanisms in the Internal Cooling Channels of a Rotating Turbine BladePARTNER: EUROTURBO |
Anielli, D. Borello, D. Rispoli, F. Salvagni, A. Venturini, P. | |
Prediction of Erosion Induced by Solid Particles in a Water TurbinePARTNER: EUROTURBO |
Ghenaiet, A. | |
Prediction of Unsteady Turbine Trailing Edge Wake Flow Characteristics and Comparison with Experimental DataPARTNER: EUROTURBO |
Mateos, B. Sieverding, C.H. Vagnoli, S. Verstraete, T. | |
Preliminary Design Rules for Electromechanical Actuation Systems – the Effects of Saturation and CompliancesPARTNER: CEAS |
Fu, Jian (Institut Clément Ader, INSA), Hazyuk, I., Maré, J.C. (Institut Clément Ader, INSA) | |
Preliminary Investigations of Passive Tip-Injection in a Linear Turbine Cascade with Shrouded BladesPARTNER: EUROTURBO |
Ghaffari, P. Willinger, R. | |
PROBA-3 Rendezvous Experiment Design and DevelopmentPARTNER: CEAS |
Bastante, Juan Carlos | |
Probabilistic Analysis of Manufacturing Uncertainties for an Automotive Turbocharger Centrifugal Compressor using Numerical and Experimental MethodsPARTNER: EUROTURBO |
Hartuc, T. Javed, A. Pecnik, R. van Buijtenen, J. P. | |
Profile Adaptation for Coherent Structure Reduction on Backward-Forward SweepPARTNER: EUROTURBO |
Beddadi, Y. Demory, B. Franquelin , F. Henner, M. Roland, C. | |
Progress in Inverted Joined Wing Scaled Demnostrator ProgrammePARTNER: CEAS |
Galinski, Cezary (Institute of Aviation), Hajduk, J.H. (Air Force Institute of Technology), Adam Sieradzki (Institute of Aviation), Rodzewicz, M.R. (Warsaw University of Technology) | |
Propulsive performance of a c3h4/h2o2 rocket prototype for future green bipropellant thrustersPARTNER: CEAS |
Pasini, Angelo (Alta), Pace, G., Torre, L. (Alta S.p.A.) | |
Pulcher-pulsed chemical rocket with green high performance propellants: second year project overviewPARTNER: CEAS |
Pasini, Angelo (Alta), Torre, L., Pace, G., Pasini, A. (Alta S.p.A.) | |
Realistic Velocity And Turbulence Intensity Profiles at the Combustor-Turbine Interaction (CTI) Plane in a Nozzle Guide Vane Test FacilityPARTNER: EUROTURBO |
Bacic, M. Cresci, I. Ireland, P.T. Rawlinson, A. Tibbott, I. | |
Recent Advances in the Design and Analysis of Marine PropulsorsPARTNER: EUROTURBO |
Kinnas, S.A. | |
Relative Optical Navigation for a Lunar Lander MissionPARTNER: CEAS |
Verveld, Mark Johannes | |
Research and Development of Time and Energy Managed Operations (TEMO)PARTNER: CEAS |
Bussink, Frank (National Aerospace Laboratory NLR) | |
Response of a Transonic Compressor to a Massive Inlet DistortionPARTNER: EUROTURBO |
Brandstetter, C. Holzinger, F. Schiffer, H.-P. Wartzek, F. | |
Robust Thruster Fault Diagnosis: Application to the Rendezvous Phase of the Mars Sample Return MissionPARTNER: CEAS |
Fonod, Robert; Henry, David; Charbonnel, Catherine; Bornschlegl, Eric | |
Rotorcraft Noise and Emissions Reduction Process for CleanSky – The Measurement of SuccessPARTNER: CEAS |
D'Ippolito, Roberto (Noesis Solutions), Smith, C.S. (Agusta Westland), Pachidis, VP (Cranfield University), Stevens, J.S. (National Aerospace Laboratory NLR), Thevenot, L.T. (Airbus Helicopters) | |
Rotorcraft System Identification: An Integrated Time-Frequency Domain ApproachPARTNER: CEAS |
Bergamasco, Marco; Lovera, Marco | |
Rotorcraft-Pilot Coupling Research in Europe: A Success Story in CollaborationPARTNER: CEAS |
Dieterich, Oliver (Airbus Helicopters Germany), Pavel, M.D. (Technical University of Delft) | |
RPAS Systems Overview and Configuration ToolPARTNER: CEAS |
Gruber, Mario (Fach Hochschule Joanneum), Flühr, H.F., Kainrath, K.K., Jelinek-Nigitz, H.J. (FH Joanneum), Fortner, R.F., Ritzinger, M.R. (AAI – Austrian Aeronautics Industries Group) | |
Similarities of Hedging and L1 Adaptive ControlPARTNER: CEAS |
Bierling, Thomas; Höcht, Leonhard; Merkl, Christian; Holzapfel, Florian; Maier, Rudolf | |
Simulating and testing throw-nets for space debris removalPARTNER: CEAS |
Wormnes (European Space Agency) | |
Simulation Driven Design and Additive Manufacturing. A new design process to unleash potential of Additive Manufacturing freedomPARTNER: CEAS |
Cervantes Herrera, Alejandro (Altair Engineering) | |
Simulations of Particulate Flows Through a Radial Gas TurbinePARTNER: EUROTURBO |
Ghenaiet, A. | |
Single vs Two-Loop Integrated Guidance SystemsPARTNER: CEAS |
Gutman, Shaul; Rubinsky, Sergey; Shima, Tal; Levy, Maital | |
Solution Space-Based Complexity Metric for ATCPARTNER: CEAS |
Mercado Velasco, Gustavo (Delft University of Technology), Borst, C. (Delft University of Technology) | |
Space Capsule Using Energy of Gravitational Field for Flight ControlPARTNER: CEAS |
Sandu, Constantin (Romanian Research and Development Institute for Gas Turbines COMOTI), Brasoveanu, D. (Raytheon) | |
Space-Borne Geolocation with a Quasi-Planar Satellite ClusterPARTNER: CEAS |
Leiter, Noam; Gurfil, Pini | |
Spacecraft Attitude Control Based on Magnetometers and GyrosPARTNER: CEAS |
Bergamasco, Marco; Lovera, Marco | |
Spacecraft Fault Detection & Isolation System Design Using Decentralized Analytical RedundancyPARTNER: CEAS |
Indra, Saurabh; Travé-Massuyès, Louise | |
Spatially Resolved Acoustic and Aerodynamic Studies Upstream and Downstream of an Industrial Axial Fan with Involvement of the Phased Array Microphone TechniquePARTNER: EUROTURBO |
Benedek, T. Vad, J. | |
Special Equipment Which Uses Concentrated Solar Light for Earth Protection Against Asteroids-Advanced Design and TechnologyPARTNER: CEAS |
Sandu, Constantin (Romanian Research and Development Institute for Gas Turbines COMOTI), Brasoveanu, D. (Orbital ATK), Anghel, O., Voicu, R., Zavodnic, R. (COMOTI) | |
Statistical Time and Market Predictive Engineering Design (STAMPED) Techniques for Preliminary Aircraft SizingPARTNER: CEAS |
Barrett, Ronald (The University of Kansas) | |
Steady / Unsteady Diffuser Flow in a Transonic Centrifugal CompressorPARTNER: EUROTURBO |
Benichou, E. Trébinjac, I. | |
Stereo Vision Based Obstacle Avoidance on Flapping Wing MAVsPARTNER: CEAS |
Tijmons, Sjoerd; de Croon, Guido; Remes, Bart; De Wagter, Christophe; Ruijsink, Rick; Van Kampen, Erik-Jan; Chu, Qiping | |
Supersonic Impulse Turbine For Automotive Waste Heat Recovery: a Comparison of Three Designs of Turbine Blade ProfilesPARTNER: EUROTURBO |
Cherkasova, M. G. Kunte, H. S. Olennikov, S. Y. Pautov, D. V. Rassokhin, V. A. Seume, J. R. Zabelin, N. A. | |
TECS Generalized Airplane Control System – an UpdatePARTNER: CEAS |
Lambregts, Antonius, Adrianus | |
TECS-Based Generic Autopilot Control Laws for Aircraft Mission SimulationPARTNER: CEAS |
Looye, Gertjan | |
THCS Generalized Airplane Control System DesignPARTNER: CEAS |
Lambregts, Antonius, Adrianus | |
The Clean Sky Experience: a Cluster Core Partner’s perspectivePARTNER: CEAS |
Kortbeek, Peter (Fokker Technologies), Kos, Johan (National Aerospace Laboratory, NLR) | |
The constructal principle and character law, hyperbolic, of natural design, a new paradigm of aerospace systemsPARTNER: CEAS |
Stanciu, Virgil (University Politehnica of Bucharest), Pavel,C. (University Politehnica of Bucharest) | |
The Experiments with Obstacle Avoidance Controls Designed for Micro UAVPARTNER: CEAS |
Kownacki, Cezary | |
The implications of aerospace requirements on the design-space of a permanent magnet starter/generatorPARTNER: CEAS |
Brink, Emile (Aeronamic), Gerber, M. (Aeronamic), Geest, M. (Technische Universiteit Delft), Zeilstra, D. (Aeronamic), Boer, A. (NLR) | |
The Importance Of Non-Linearities In Aircraft Preliminary DesignPARTNER: CEAS |
Nicolosi, Fabrizio (University of Naples Federico II""), de Marco, A., della Vecchia, P (University of Naples Federico II"") | |
The Influence of Labyrinth Flows on the Aerodynamic Performance of an Axial CompressorPARTNER: EUROTURBO |
Flores, D. Seume, J. R. | |
The influence of the drag dynamic stall in the vawt starting efficiencyPARTNER: CEAS |
Malael, Ion (Romanian Research and Development Institute for Gas Turbines COMOTI), Dragan, V., Gherman, B. (Romanian Research & Development Institute for Gas Turbines COMOTI) | |
The Influence of the Taylor Series Remainder on an Incremental Non-Linear Dynamic Inversion ControllerPARTNER: CEAS |
Hertog, A.L. | |
The Structure of Turbulent Boundary LayerPARTNER: EUROTURBO |
Jiménez, J. | |
The Total Energy Control Concept for a Motor GliderPARTNER: CEAS |
Lamp, Maxim; Luckner, Robert | |
Thermal Properties of C919X EHAs Operating During Whole Flight EnvelopePARTNER: CEAS |
Fu, Yongling (Beihang University), Han, X., Qi, X.Y. (Beihang University), Wang, L.J. (COMAC) | |
Thermally Induced Vibration Analysis of Flexible Solar WingPARTNER: CEAS |
Kong, Xianghong (Nanjing University of Aeronautics and Astronautics), Yang, J. (RMIT University), Wang, Z. J. (NUAA) | |
Thinking out of the Box: unwrapping the ‘Flying Car’. How to combine personal transport in the air and on the roadPARTNER: CEAS |
Jorna, Peter (PAL-V), Dingemanse, R.D. (PAL-V) | |
Time-Efficient and Accurate Performance Prediction and Analysis Method for Planetary Flight Vehicles DesignPARTNER: CEAS |
Jarzabek, Artur A. (Technical University of Madrid UPM), Moreno Lopez, A.I., González Hernández, M.A., Perales Perales, J.M. (Technical University of Madrid UPM) | |
Toward a High-Order Preserving Sliding-Mesh Approach for Computational Aeroacoustics in Subsonic TurbomachineryPARTNER: EUROTURBO |
Deligant, M. Foulquié, C. Henner, M. Khelladi, S. Mardjono, J. Nogueira, X. Ramirez, L. | |
Toward an Autonomous Lunar Landing Based on Low-Speed Optic Flow SensorsPARTNER: CEAS |
Sabiron, Guillaume; Chavent, Paul; Burlion, Laurent; Kervendal, Erwan; Bornschlegl, Eric; Fabiani, Patrick; Raharijaona, Thibaut; Ruffier, Franck | |
Transition Calculations with the MARV Reynolds Stress ModelPARTNER: EUROTURBO |
Moore, J. Moore, J.G. | |
Turbine Design and Optimisation for Oscillating Water Column Power Plants Using a Multi-Fidelity Design SystemPARTNER: EUROTURBO |
Castro, F. Gonzalez, G. Shahpar, S. | |
UAV Trajectory Generation Using Fuzzy Dynamic ProgrammingPARTNER: CEAS |
Basmadji, Fatina Liliana; Gruszecki, Jan | |
Uncertainty Quantification and Robust Optimization for Throughflow Axial Compressor DesignPARTNER: EUROTURBO |
Brouckaert, J.F. Sans, J. Verstraete, T. | |
Understanding Fleet Impacts of Formation FlightPARTNER: CEAS |
Boling, Bryan (RAND), Stumpf, E., Liu, Y. (RWTH Aachen University) | |
Unsteady Behavior of Corner Separation in a Compressor Cascade - LES and Experimental StudyPARTNER: EUROTURBO |
Boudet, J. Gao, F. Lu, L. Ottavy, X. Shao, L. Zambonini, G. | |
Unsteady CFD Simulation of a Turning Mid Turbine Frame with Embedded DesignPARTNER: EUROTURBO |
Bader, P. Peterleithner, J. Sanz, W. Spataro, R. | |
Unsteady Effects on Turbine Performance by Compressible Direct Numerical and Large Eddy SimulationsPARTNER: EUROTURBO |
Michelassi, V. | |
Unsteady Flow and Acoustic Behavior of an Axial Fan: Numerical and Experimental InvestigationsPARTNER: EUROTURBO |
Lavedrine, J. Younsi, M. | |
Unsteady Pressure Measurements of Spike Type Inception in Axial Compressor: Time Frequency Analysis and Averaging ProcedurePARTNER: EUROTURBO |
Bois, G. Dazin, A. Roussette, O. Vegliò, M. | |
Unsteady RANS Simulations of a Low Speed Fan for Analytical Tonal Noise Prediction.PARTNER: EUROTURBO |
Guédeney, T. Moreau, S. | |
Unstructured Shock-Fitting Calculations of Transonic Turbo-Machinery FlowsPARTNER: EUROTURBO |
Bonfiglioli, A. Paciorri, R. | |
Use of simulator motion feedback for different classes of vehicle dynamics in manual control tasksPARTNER: CEAS |
Lu, Tao (Delft University of Technology), Pool, D.M., Damveld, H.J., van Paassen, M.M., Mulder, M. (Delft University of Technology) | |
Using Shape Memory Alloys for Improving Automotive Fan Blade Performances: Experimental and CFD AnalysisPARTNER: EUROTURBO |
Aldi, N. Fortini, A. Merlin, M. Pinelli, M. Suman, A. | |
Using wing modal deformation for improvement of CFD results of ESWIRP projectPARTNER: CEAS |
Vrchota, Petr (Aeronautical Research and Test Institute), Prachar, A.P. (Aeronautical Research and Test Institute) | |
Validation of Time-Domain Single-Passage Methods for the Unsteady Simulation of a Contra-Rotating Open RotorPARTNER: EUROTURBO |
Parry, A.B. Stapelfeldt, S.C. Vahdati, M. | |
Verification Of The Three Dimensional Shock-Structures in a S-Shaped Transonic UHBR Fan-RotorPARTNER: EUROTURBO |
Meillard, L. Nicke, E. Schnell, R. Voges, M. Voigt, C. | |
Video Navigation and GNC System Layout for a Rendezvous with a Noncooperative Tumbling TargetPARTNER: CEAS |
Sommer, Josef; Ahrns, Ingo | |
Vision Based Rendezvous GNC Techniques and Test Benches for Active Debris RemovalPARTNER: CEAS |
Bastante, Juan Carlos; Penin, Luis F. | |
Visual tracking of ground and air targetsPARTNER: CEAS |
Gafurov, Salimzhan (Samara State Aerospace University), Zakharov, K. (Samara State Aerospace University) | |
Wind tunnel high speed powered tests of the ERICA tilt rotor model in S1MA - NICETRIP ProjectPARTNER: CEAS |
Lebrun, Frederic (ONERA) | |
Wind tunnel model support and wall interference corrections in DNW-HST- ensuring high data quality standards -PARTNER: CEAS |
Wubben, Frenk (German-Dutch Wind Tunnels DNW), Takara, E.K. (Embraer) | |
Wind Tunnel Test For Breakthrough Laminar Aircraft Demonstrator Europe at DNW-LLFPARTNER: CEAS |
Artois, Koen (German-Dutch Wind Tunnels DNW), Postma, J., Philipsen, I. (German-Dutch Wind Tunnels DNW) | |
X-by-wire Vehicle Prototype: Automatic Driving Maneuver Implementation for Real-Time MBS Model ValidationPARTNER: EUROMECH |
R. Pastorino, M.A. Naya, A. Luaces, J. Cuadrado |
Books
Presentations
Title | ||
---|---|---|
The Physics of Turbulent Boundary LayersJavier Jiménez |
Journals
Title | Link | |
---|---|---|
CEAS Aeronautical JournalISSN 18695590
|
||
CEAS Space JournalISSN 18682510
|
||
European Journal of Mechanics - A/SolidsISSN 09977538
|
||
European Journal of Mechanics - B/FluidsISSN 09977546
|
||
Flow, Turbulence and CombustionISSN 15731987
|
||
International Journal of Heat and Fluid FlowISSN 0142727X
|
||
International Journal of Turbomachinery, Propulsion and PowerISSN 2504-186X
|
||
Journal of Aerospace EngineeringISSN 08931321
|